Geared Solutions Levels 1-80
Written by
eyao | Last updated 2 months ago
|
60 Thanks
|
Here are all the solutions to the popular iPhone game Geared. Remember to try to figure it out yourself first otherwise you lose the fun in the game! The solutions will always be listed in pairs of levels, just use the table of contents to the right to navigate to where you need to go.
Click on the images to enlarge!
These first few are tutorial levels, and there are some basic gear placement until level 20.
Level 21 introduces a new area called the "No Drop Zone" which means you cannot place a gear on the screen if the center is located within the zone. This may seem like an impossible level at first, but it never says anything about the center being in there after its placed. By now you probably would have realized there's an element of gravity in the game. Just place the larger gear first with the center ABOVE the No Drop Zone (make sure its highlighted green) and then gravity will bring it down so you can place your second gear!
Level 21 (use gravity!)
Level 22
Level 24 again has the "No Drop Zone" - just be sure to drop both gears above the red shaded area to their respective positions and you'll be fine!
Level 25 is slightly more
difficult. Take a smaller gear and drop it from the very top left of
the screen to attach to the yellow (shown in the image). Then take the
big gear to connect it to the small gear you just placed (as high as
possible), the center of the larger gear will barely be outside the red
area. From there it should be pretty easy.
Level 26 is pretty self explanatory if you've made it this far, I'll shut up now about using gravity to place gears unless it's extra hard to place it.
Level 29 - only the second gear needs to be dropped.
Level 30 has a new element, the slider. To complete this one, move the slider down and place the first gear (center should be between the two red shaded areas), and then place the second one as shown.
Level 31 - Place the smallest gear first, move the slider, then place the middle gear, then after that place the largest. Easy!
Level 34 - Place one big gear first, then drop the second tiny gear in the middle, then place the final gear.
Level 37 - Place the first big gear, move the slider to place the second big gear, move the slider again back to place the medium gear.
Level 40 - Legit way: move the slider so that the red area is to the left and drop the big gear, move the slider back to the right to drop the middle gear so it connects as shown to the big one, after that the smaller gear can then be placed to finish it.
(There's a small bug right now that lets you finish it much easier!)
Level 41 - Move the slider to place the first Big Gear connect to the yellow, then drop the tiny gear on top of it, then place the other large gear on top of that to complete.
Level 42 - Place the tiny gear in the bottom left, then the huge one, then finally the last one. The slider never needs to be moved.
Level 47 - Drop one small one, then place the two medium gears carefully as shown to allow yourself to drop the final two to complete it.
Level 49 - This one will probably require you to move pixel by pixel - just start with close to the diagram and move it slightly till it works!
Level 54 - This one requires some luck to it as it has to be pixel perfect to dropping the small gears (the way I did it is shown below). There are several solutions to this, but they all require that one perfect drop on the small gear - if anyone has a easy way to do this level please let me know!
update: DavidA of PlayHaven has submitted his solution for 54 shown below which is 100% easier!
DavidA' s Level 54 Solution
Level 58 - The tiny gear in the middle needs to be placed "just right" in order to power both surrounding gears.
Level 59 - The last tiny gear up top will require some pixel fine tuning to get right, but rest is easy!
Level 60 - This one is much harder to place - the first tiny gear should go below the giant yellow gear, then the hard part is dropping the second tiny gear so that it touches the right blue gear at the bottom. Keep trying until it touches and you'll know when it starts spinning. After that just drop the final gear.
Level 75 - The key is the correct placement of the first medium sized gear, you may have to drop it a ton of times to make it connect. Once that's done, the rest can be dropped much easier.
Level 76 - The goal here is to support the large gear with that small gear on the left. In order to do this, make the red movable section go left to place the small gear. Then make the red section go right to place the larger gear. This makes it so that the larger gear's center is slightly above the center of the tiny gear which will hold it in place. With this done, the two remaining gears can be placed easily.
Level 78 - Drop the two small ones on the top left before the medium sized gear.
Level 80 - Left side: the most important one is to drop the first tiny gear to be as high as possible so that the 3rd one will connect to the top left medium sized one. Right side: use the right small gear to help the left one drop to its position (place the right one, then drop the left one on top of it, and then remove the right one to let the left fall into place - then place the right one again)
Until more levels are released, that's all folks!
Thanks for reading!
Related Guides for Geared
Share on Facebook
Share on Twitter
Login now to comment or Register an account